MDS-30GT

The MDS-30GT’s brilliant design results in amazing throughput and payload at an equally amazing price.

• Overview

  The MDS-30GT is all about performance, with class leading payload of up to 14,000 lbs and throughput up to 6,500 lbs /hr. The MDS-30GT is designed to be cost efficient, reliable and competitively priced.

• Features

  

  Shredder

  The MDS-30GT gets it’s amazing performance from the tried and true ST-15H shredder with an updated hydraulic system. The cast aluminum ST-15H has exceptional strength without the weight of steel; in its MDS-30GT configuration, the ST-15H shreds up to 6,500 lbs/hr. The shredder features hub knives, high strength alloy shafts as well as two all new patent pending innovations: cast-in cleaning fingers and a vibrating feed hopper®.

  Bin Tunnel and Controls

  The MDS-30GT is equipped with Shred-Tech®’s new patent pending Gripper Tipper® bin tunnel loading system. The Gripper Tipper® allows for quick and easy loading of all industry standard containers and ensures materials are protected from environmental elements such as wind and rain.

  The state of the art Plus 1® micro-control system with advanced intelligence is powerful enough to allow remote diagnostics, advanced predictive idle and auto-shutdown while remaining easy to use.

  Auger Compactor and Auto Unloading

  The MDS-30GT comes equipped with Shred-Tech®’s angled compactor design and durable moving floor unloading system. Together, these features ensure maximum payload of up to 14,000 lbs and rapid discharge of shredded material in a few minutes, equating to more time on-route shredding paper and generating revenue.

  Environmental Stewardship

  The MDS-30GT meets the EPA’s strict new low emissions standards and operates on ULSD (ultra-low sulfur diesel fuel) or B5 Biodiesel fuel. The MDS-30GT is also equipped with Shred-Tech®’s Predictive Idle with auto shutdown and remote panel start/stop. Predictive Idle senses low shredder loads and shuts off the high engine idle when the shredder is unattended and the hopper is empty. Moments later the PTO’s are turned off along with the engine. This means never wasting fuel and engine hours.

• Specifications

  MDS-30GT TECHNICAL SPECIFICATIONS
  Throughput*	Up to 6,500 lbs/hr
  MEASUREMENTS
  Length	31'
  Width	8'
  Height	13'4"
  Chassis GVW	33,000 lbs
  Legal Payload Capacity*	14,000 lbs
  PRODUCT SPECIFICATIONS
  Drive	Hydraulic
  Number of Motors	1
  Horsepower	114
  Knife Thickness (STD)	5/8"
  Number of Knives	36
  Knife Diameter	6 3/4"
  Hex Size	2 11/16"
  Distance Between Shafts	5 7/8"
  Cutting Chamber	21" x 14"
  ENGINEERING
  Shred-Tech® Model ST-15H Hydraulic Shredder	S
  Auger Compactor	S
  Bridgeless Feed Hopper	S
  “Patented” Retractable Bin Tunnel	S
  Gripper Tipper® – Patent Pending	S
  FRP Unibody	S
  Hydraulic Reservoir (36 US Gallons)	S
  Main Control Panel c/w Micro Controller	S
  Remote Operator Control – Video Monitoring	S
  Drive Configuration – PTO/Hydraulic	S
  Safety and Maintenance Training at Shred-Tech®	S
  Active Floor Unloading System	S
  Remote Panel Engine Start/Stop	S
  Predictive Idle With Auto Shut Down	S
  Shredding and Storage Area Cameras	S
  Exhaust – Horizontal	S
  CHASSIS
  Freighliner M2 240 HP	S
  OPTIONS
  Weigh Scale – Portable (Certifiable as Legal for Trade)	O
  Back-Up Sensor System	O
  Back-Up Camera System	O
  Tool Kit	O
  Painted Cab and Body (Other than White)	O
  Digital Video Recording System	O
  Strobe Light Package	O
  Safety and Maintenance Training at Customer Location	O
  Polished Aluminum Tool Box	O
  Remote System Diagnostics	O

  S = Standard   O = Option   X = Not Available

  *Throughput is an estimate based on actual test data and can vary depending upon many factors, including paper type, system maintenance and operator training.

  **Payload calculation based on GVWR.